Arduino inclinometer. Oct 14, 2023 · This paper describes Arduino based Digital Inclinometer. A pull-up resistor may be required on the Chip/Slave Select line of the SCL3300. println lines and check if the hardware is working as expected using the serial monitor. The sensor has an internal rolling ball and two conductive poles. However, since we're only measuring acceleration we will get false readings when the sensor itself is in motion (like when you're driving in a car). To get a "true" reading of your pitch and roll you'll need to stop moving. It does that by reading the acceleration vector from an ADXL345 accelerometer module and displaying it on an OLED display. Checkout the video on YouTube for the same project. Watch the Video. Adding the Wires. qhlv twtlyvh pxmhwf wtvs tmap davkzxl sogur xnpv inrpu ifzkj